How to Connect WiFi Without Password – 3 Simple Ways

How to connect to Wi-Fi without knowing the password You’re at a close friend’s house, and you want to use their Wi-Fi network. But what if your friend doesn’t know your password? Intent on finding a solution to this problem, he consulted Google in search of a system to connect to Wi-Fi without knowing the password. So, you don’t have to get it back in overly complicated ways, and that’s exactly why the site has it on my web.

Have I exactly identified the situation you are in?

In this case, know that you have come to the right place at the right time! In fact, below, I will show you a series of methods that can be used in such cases, which take advantage of some features of commonly used devices, which are often little known. From

How to connect to WiFi without knowing the password step by step.

Despite what you might believe, in some situations, it’s possible to connect to Wi-Fi without knowing the password. Below, we explain what, in my opinion, is all there is to practice in such cases

What are the fastest and most effective techniques?

WPS Technology

One of the easiest ways to connect to Wi-Fi without knowing the password involves using WPS technology. If you’ve never heard of it, it’s a standard designed to simplify connections to wireless networks, avoiding the entry of long and complex passwords.

Simply put, WPS allows you to connect a device to the Internet in Wi-Fi mode by simply pressing a button (or entering an 8-digit PIN).

However, for everything to be successful, it is important that both the router it is connected to and the devices that will be connected are compatible with this technology. Now Windows and Android (versions before 9) support the use of WPS technology, while Android 9 and later, iOS, iPadOS, and macOS do not.

The threat of WPS

Also, I would like to point out that, as this DC/18 kh…

Put simply, the WPS feature is officially “marked” as vulnerable because it presents a series of vulnerabilities that the most sophisticated cybercriminals can exploit to breach the reference network. of

For this reason, some routers disable this feature by default. However, if the owner of the network of interest has enabled it, or if it is enabled on the router, you can use it to establish a connection between it and your wireless device. How? I will explain it right away. do

How to activate WPS?

To begin, approach the router and locate the physical button WPS, usually located on the front of the device or on one of its lateral bodies. Usually, the button described above is identified by an abbreviation that indicates the name of the technology (actually WPS) or by an icon in the form of an anti-circular arrow.

Once you identify the WPS key, press it, hold the device to connect to the Internet, go to Wi-Fi network settings, and the network name to connect to.

●Select then follow the instructions that are most appropriate for the operating system you are using.

●Windows – On the network icon placed near the clock

●Click , then the Wi-Fi network of interest

●Click on the name and connect button. If everything

●If you go in the right direction, you only need a few moments

●A password entry screen should appear, which

●After the connection is fully automatic and redundant will be established without the need for an operation.

On the Android home screen or in the app drawer , tap the gear button, select Settings Operating system, and open Wi-Fi. Touch the article button (:) at the top right and then the advanced element, which appears in the on-screen menu. At this point, run the voice command button and wait for the connection to the WPS network of your interest to complete.

Share from mobile phone/tablet.

If you are in the company of someone who is already connected to the Wi-Fi network of your interest via a mobile phone or tablet, you may be asked to share the relevant passkey with you.

For example from Android, if the person has a smartphone Android, which is equipped with a certain type of operating system (such as ROM MIUI de Xiaomi ), you can send the password via QR code. You are looking for

This is very easy to do: you have to access the adjustment operating system. Enter the Wi-Fi section and tap the name of the network you’re connected to (tap to share the password accordingly).

After a few moments, the QR code A containing the detected network key should appear on the device screen. What you should do now is scan the QR code with your mobile phone or tablet, using one of the applications dedicated to the purpose, and read the password it contains. someone

If an Android device does not have this functionality, one can resort to using Wi-Fi Recovery, an application that can retrieve and display in clear text the passwords of all networks stored on the device.

So, download and start the application

Next, he needs to grant necessary permissions to use Superuser/SuperSU by responding affirmatively to the warning message displayed on the screen. Once this is done, touch the network name of your interest to get the required network key (shown in Newsroom PSK).

From Apple If, ​​on the other hand, you and the other person both have an Apple-branded device and the latter is already connected to the Wi-Fi network whose password you’re interested in, you can share it. can use system continuity for This Apple-owned technology allows you to share certain data between iOS, iPadOS, and macOS devices, including passwords for wireless networks you’re connected to.

For an exchange to be successful, some very specific conditions must be met.

The device must be on board Wi-Fi, already connected to the network. iPadOS or later iOS 11 Your device, which can be a Mac, another iPhone, or iPad, has one of the OSes seen earlier, or 10.12 macOS or later

It is necessary. Both devices must be Bluetooth enabled and Is. can be found in the lists If these conditions are met, do the following: Wi-Fi network password input screen on your device and ask your friend to unlock iPhone/iPad and password sharing Reply affirmatively to the request message. If everything goes well, after a few seconds, your device will be connected to the Internet.

The other must “know” in some way

For example, they their respective contacts Router recovery. As an alternative to the methods seen above, you can try to recover the router’s Wi-Fi password through the router itself.

If you have access to the device, you can take a look at the sticky label that is usually stuck on the back of the device or on the back of the device. Usually, the default network key is specified there. If the rightful owner of the router has never changed it, any luck you may get the desired result.

If this method fails, you can try to retrieve the Wi-Fi network key directly from the router’s admin panel. However, in this case, the PC, it is important that other electronic devices are connected to the required network; either you can take advantage of the connection of the Ethernet, mobile phone, or tablet. If this is the case for you, follow the instructions below. In this case

Instructions Using the browser of your choice, from a device already connected to the router, go to the administration panel of the device in question. To do this, type in the address bar of your browser’s IP address, which usually corresponds to 192.168.1.1, 192.168.0.1, or 192.168.1.254 and comes to the presenter. If the above addresses lead to an error message, follow the steps provided in this guide to retrieve the correct address.

When the router’s administration panel appears, enter the username and password in the appropriate fields. If this information has never been changed, you can try logging in with admin/admin or admin/password. (which are the most common default combinations). However, if this is your first access to the router, you may be prompted to set your password. If you’re having trouble logging in with this information, see my guide on how to view a modem’s password to try bypassing the hook.

After logging in, use the router’s main menu (usually located on the top or left side) to access the Wi-Fi Settings (Wi-Fi or Wireless Networks) section. Security requirements. If everything went in the right direction, the network key should be inside the dedicated field, usually called Password 0 PSK.

Unfortunately, it’s not possible for me to give you additional details about the steps to follow because I don’t know the router model you’re using, and each device has a different menu structure.

The owner of a guest-mode Wi-Fi network wants to allow you access to it but doesn’t intend to share its network key with you for obvious security reasons? If so, you may be recommended to enable the router’s guest mode.

This function allows you to create a second wireless network named y with different network keys. In some cases, certain restrictions may apply to guest networks, such as the ability to only keep devices connected for a certain period of time. Even just some internet protocols

Restricting access to (for example, web browsing only). ), restrict sites that can be visited, etc. Jinn

However, to enable guest network mode, you need to access the router admin panel. Go to the section dedicated to Wi-Fi y enable the interfering guest network on the appropriate lever, or place a check mark next to the dedicated article. In general, you can specify various settings using the menus and text fields below.

A practical example

For example, on the router I have (a 7530 AVM FRITZ! Box ), the steps to follow are as follows: When you are logged in, click on the item Wi-Fi in the left sidebar, then in the element Guest Access to the right under it and put a checkmark next to the item Active Guest Access.

Then you must choose whether to create a private wireless access point. That is, a network protected by a different password from the central one, or a public wireless access point that, on the other hand, is not protected by a password (and to which, of course, data is transmitted in unencrypted form).

Once the best mode for you is enabled, the settings at the very bottom to display the network name, final access password and, if you want, advanced settings related to allowed protocols/sites and connection timers. Use the When you’re done, click the button. Apply to confirm the applied changes.

Others to connect to Wi-Fi without knowing the password

Methods Did none of the above methods lead to the desired result? If you want to know how to connect to Wi-Fi without knowing the password, the only hint I can give you in this case is to recover the network key using a slightly more difficult method. Searching for data, which requires the use of advanced tools. (eg Kali Linux) and very specific information in terms of network security.

However, I would like to point out that using a similar system can represent a crime. Unauthorized access to secure wireless networks is a serious breach of privacy. Therefore, use the information I provide only in extreme emergencies. And, above all, to get permission from the rightful owner of the Wi-Fi network

Download

Leave a Reply

Your email address will not be published.